New Job Vacancies at Barrick Bulyanhulu Gold Mine Corporation

Tags

 

Foreman Shaft & Infrastructure Electrical and Instrumentation
POSITION DESCRIPTION:

Bulyanhulu Gold Mine is seeking to recruit Foreman Shaft & Infrastructure Electrical and Instrumentation to join our team. The successful candidate for this position is expected to align to the Barrick DNA and drive a change within his team and the business and on a practical note will ensure activities in the Engineering department are effectively planned and undertaken in a safe and cost effective manner to achieve targets in accordance to BGML Mining Safety Standards, Policies and Procedures. 

Recommended:

Reporting to: Mining Maintenance Superintendent
Work Schedule: Forty-Two (42) Days On / Twenty-One (21) Days Off
Duration: 2 Years
RESPONSIBILITIES:

  • To ensure that work done is accordance with Tanzanian mining regulations and established SOP
  • To monitor the progress of daily activates and production target achieved
  • To rectify any identified challenges that limit productivity
  • Lead and direct shaft operation to adhere to shaft strategies, budget, plans and safety standards
  • Provide leadership and support to ensure that employees comply with safety standards
  • Create a working environment, which ensures that employees gain new skills and achieve their full potential by developing and implementing effective mentoring programs
  • Work directly with the crew and ensure that Barrick business objectives and safety, health & environmental policies are achieved
  • Report daily progress to the shaft engineer (Superintendent)
  • Participation in all applicable safety toolbox and prestart meetings
  • To ensure shaft procedures and maintenance schedules are followed
  • Participate in a formal Engineering Training program to for Tanzanian artisan on-site training
QUALIFICATION REQUIREMENTS:
  • Ordinary secondary education
  • Artisan Trade Certificate
  • Appropriate winder and electrical training certificate for winders
  • Valid driving license

EXPERIENCE REQUIREMENTS:

  • Minimum of 10 years’ experience as Electrical F/M in the Mining Industry. Winding plants, Fridge plant; Crushers, Compressors, Backfill plants
  • Underground shaft safety devices
  • Underground shaft pumping systems
  • Experience in shaft operating operation
  • On hand knowledge to work on winder “Safe Winder” and Winder PLC
  • Winder Silicon Control Rectifiers and Winder motors control drives
  • Winder Safety devices
  • Setting of winder safety settings
  • AC to DC drives Fault-finding

SKILLS / KNOWLEDGE REQUIREMENTS:
  • Excellent communication in English, both report writing and verbal
  • Hazard identification and Risk assessment
  • Mine health &Safety Act awareness
WHAT WE CAN OFFER YOU:
  • A comprehensive compensation package including bonuses, benefits, and where applicable.
  • Ability to make a difference and lasting impact.
  • Work in a dynamic, collaborative, progressive, and high-performing team.
  • Opportunities to grow and learn with the industry colleagues are endless.

HOW TO APPLY:
Applicants are invited to submit their CV’s/Resume’s, careful read application guidelines
Rename your CV in this format CV – YOUR FULL NAME
Indicating the role title “FOREMAN SHAFT &INFRASTRUCTURE E&I” in the subject of your email
Send your application via e-mail to: bulyrecruitment@barrick.com

If you are not contacted by Barrick – Bulyanhulu Gold Mine LTD within thirty (30) days after the closing date, you should consider your application as unsuccessful. Short listed candidates may be subjected to any of the following: security clearance; competency assessment; physical capability assessment, reference checking.
Please forward applications before 10th February 2021
BEWARE OF CONMEN! BGML does not receive money in exchange for a job position. Should you be asked for money in exchange for a job offer or suspect such activity, please report this immediately to our Compliance Hotline, by calling +1-877-246-5399 or through www.barrickgold.ethispoint.com

Fabrication Workshop Supervisor
POSITION DESCRIPTION:

Bulyanhulu Gold Mine is seeking to recruit Fabrication Workshop Supervisor to join our team. The successful candidate for this position is expected to align to the Barrick DNA and drive a change within his team and the business and on a practical note will ensure activities in the department are effectively planned and undertaken in a safe and cost effective manner to achieve targets in accordance to BGML Mining Safety Standards, Policies and Procedures.

Reporting to: Engineering Superintendent
Work Schedule: Five Days (5) Days On / Two (2) Days Off
Duration: Permanent

RESPONSIBILITIES:

  • Ensure a healthy and safe working environment for all employees.
  • Supervising and lead the fabrication maintenance crew as directed by the supervisor
  • Maintaining, repairing mobile equipment/fixed plant and report back to foreman Mobile Maintenance.
  • Ensure that all fabrication and machining works are carried out to required standards and in a safe and cost-effective manner.
  • Ensure all Barrick safe work practices are observed and implemented in the department of responsibility.
  • Ensure the preparation and execution of maintenance plans and schedules based on daily, weekly and monthly mining and ore processing priorities.
  • The quality, cost and timeliness of maintenance activities are critical to the project as a whole.
  • Ensure maintenance costs are kept to, or below assigned budget.
  • Display a sense of urgency to ensure timely repair and maintenance of mine equipment.
  • Contribute to the operations by ensuring that all maintenance activities are planned and completed in a cost-effective manner with minimal disruption to ore processing and mining activities.
  • Demonstrate commitment to safe work practices by example and act immediately on any unsafe act or situation observed and monitor standards.
  • Actively promote and foster the development of a pro-active site safety behaviors that makes safety an integral part of all work activities.
  • Identify and rectify/report specific hazards using Job Safe Environment Analysis (JSEA) process.
  • Assist with accident/incident investigation and with the induction and training of new employees
  • Ensure all employees reporting to this position attend safety related training courses and engage in any of the company’s safety initiatives.
QUALIFICATION REQUIREMENTS:
  • Welding and Fabrication certificate – (FTC, IMTT & VETA)
  • Valid Tanzanian driving license.
EXPERIENCE REQUIREMENTS:
  • 10 years’ experience in similar role
SKILLS / KNOWLEDGE REQUIREMENTS:
  • Excellent communication in English, both writing and verbal
  • Hazard identification and Risk assessment
  • Mine health &Safety Act awareness
WHAT WE CAN OFFER YOU:
  • A comprehensive compensation package including bonuses, benefits, and where applicable.
  • Ability to make a difference and lasting impact.
  • Work in a dynamic, collaborative, progressive, and high-performing team.
  • Opportunities to grow and learn with the industry colleagues are endless.

HOW TO APPLY:
Applicants are invited to submit their CV’s/Resume’s, careful read application guidelines
Rename your CV in this format CV – YOUR FULL NAME
Indicating the role title “FABRICATION WORKSHOP SUPERVISOR” in the subject of your email
Send your application via e-mail to: bulyrecruitment@barrick.com

If you are not contacted by Barrick – Bulyanhulu Gold Mine LTD within thirty (30) days after the closing date, you should consider your application as unsuccessful. Short listed candidates may be subjected to any of the following: security clearance; competency assessment; physical capability assessment, reference checking.
Please forward applications before 10th February 2021
BEWARE OF CONMEN! BGML does not receive money in exchange for a job position. Should you be asked for money in exchange for a job offer or suspect such activity, please report this immediately to our Compliance Hotline, by calling +1-877-246-5399 or through www.barrickgold.ethispoint.com